1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PicTutorial How To Create A Windows 7 Super Lite 1 CD By CmTeamPk

Armaan Ali Dec 28, 2016

Users Viewing Thread (Users: 0, Guests: 0)

  1. Armaan Ali

    Armaan Ali C.M Team King Staff Member

    5,502
    1,340
    1,055
    [​IMG]
    [​IMG]


    [​IMG]
    [​IMG]

    [​IMG]

    [​IMG]
    Warning : Do this you must bear all risks !!! Actually there was not much risk is too great to do there have to be too worried. The stripped down Windows 7 is quite easy but big easy process and you make mistakes. I did a version of Windows 7 Lite (had some tests run normally) and MGS post up to you down.


    this TUT expenditure for Windows 7 Ultimate x86 version, but if you want to do on x64, it is also similar
    - Tools required: (link down at the bottom of thread)

    of Windows 7 ISO Files +
    + ImageX from the WAIK for Vista SP1 / Server 2008 (not used WAIK 7)
    + install Tweak Wim
    + vLite 1.2 (Note: in order to not trouble installing the 1.1.6 version 1.2, you should install before then override version 1.2 up, otherwise after installing the WAIK 1.2 and you have to copy files from wimgapi.dll Program files \ Windows AIK \ Tools \ x86 on vLite folder in the installation disk).
    + Ultimatex86.bat & removex86.bat & ultimatex86.ini
    + GImageX

    * Note: After unpacking ISO file you copy files into the folder sources setup.exe a certain folder (take it away to the step 12)

    step 1 : extract the files gimagex.exe down into the path C: \ Program files \ Windows AIK \ Tools \ x86 and create a shortcut on the desktop (running for fast that). Unzip the file install tweak win in C: \ Win6x (homemade) and renamed tweak.exe (for brevity).

    Step 2 : Create two folders on the C drive (remember that if you do drive C drive flashed another bat file again to correct it). Properly following folder name C: \ s1 & C: \ s2 . S1 directory to host the files and folders windows 7 2 used to mount .wim files (mount the virtual disk, the user sure everyone knows).

    Step 3 : Extract the ISO file of Windows 7 and copy all files to the folder you just created s1

    Step 4 : Run GImageX , mount the file install.wim (located in the folder C: \ s1 \ sources ) as shown in Figure. Select the Mount , in muc Mount Point click Browse to select the folder C: \ s2 , Section source continues to do the same over. Then press select select versions Ultimate (current image how it is 5 . Then a check Read and Write .

    [​IMG]

    Step 5 : Start-> Run-> Mark cmd in the box and click OK then tremble do the same as in Fig.

    [​IMG]

    Step 6 : Tick the box Commit Changes then select .wim file and then click Unmount (do exactly the same on the show below do not do wrong).

    Step 7 : Extract batch files into specific folders. Copy files ultimatex86.bat the path C: \ s1 \ sources, copy files ultimatex86.inito folder C: \ vLite \ Preset . If the folder created in step 2, but in a different folder, it must fix that bat file.

    Step 8 : Mount the file install.wim as step 4. Then run cmd do exactly deadliest form

    [​IMG]
    [​IMG]

    Step 9 : After DISM done removing the package, exit cmd. Commit chages and unmounting as step 6

    Step 10 : Running vLite, select the version of the Windows 7 Ultimate and continue to remove some things. Use file ultimatex86.ini folders copied presets . Then continue to do the same shape:
    [HIDE]

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    A little more detailed instructions: Once integrated into the cell as shown in Figure 2 the switch to the tab you click the preset compoments then select the file was copied to the folder ultimatex86.ini preset.

    Step 11 : Click Apply to vLite do its job. Now you can stop all work here to create ISO files and tests on virtual machines but actually when our Windows 7 is still another heavy> 1GB. Should we continue

    Step 12 : On the path C: \ s1 \ sources delete all files except file boot.wim, install.wim, and copy the file setup.exe on the place attention on.

    Step 13 : Again running GImageX & Mount install.wim file (now the No. 1 spot is only decent image) into the folder c: \ s2 (make to this step, you know, right mount do after all the above steps remember to read & write that area). Mount finished, copy the file removalx86.bat into the folder C: \ s2 click Refresh a play and run it (then just press enter to continue).



    [​IMG]
    [​IMG]

    Step 16 : File bat del it is finished running. Then tick commit chages do the above steps, then unmount.

    Step 17: Run a check vLite to tweak and create ISO files box is always decent. Then tweak you prefer to choose the application or use the same preset on it. Done it already now that you just create ISO files and test on VMWare or VitualBox. Be sure to end dental feminine shape.



    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG][/HIDE]
    [HIDE]

    You're Guest, you don't have permission to view CmTeamPk link. Please Register or Login to view this link.

    [/HIDE]
     
    Last edited: Dec 28, 2016
    Syed Talha Zameer likes this.
    Loading...
  2. Syed Talha Zameer

    Syed Talha Zameer C.M Team King Staff Member

    586
    394
    95
    Gr8 Post
     
  3. jemwood

    jemwood Registered User

    18
    0
    5
    thanks..................
     
  4. aknuun

    aknuun Registered User

    11
    0
    5

    You're Guest, you don't have permission to view CmTeamPk link. Please Register or Login to view this link.

    [​IMG]
    [​IMG]


    [​IMG]
    [​IMG]

    [​IMG]

    [​IMG]
    Warning : Do this you must bear all risks !!! Actually there was not much risk is too great to do there have to be too worried. The stripped down Windows 7 is quite easy but big easy process and you make mistakes. I did a version of Windows 7 Lite (had some tests run normally) and MGS post up to you down.


    this TUT expenditure for Windows 7 Ultimate x86 version, but if you want to do on x64, it is also similar
    - Tools required: (link down at the bottom of thread)

    of Windows 7 ISO Files +
    + ImageX from the WAIK for Vista SP1 / Server 2008 (not used WAIK 7)
    + install Tweak Wim
    + vLite 1.2 (Note: in order to not trouble installing the 1.1.6 version 1.2, you should install before then override version 1.2 up, otherwise after installing the WAIK 1.2 and you have to copy files from wimgapi.dll Program files \ Windows AIK \ Tools \ x86 on vLite folder in the installation disk).
    + Ultimatex86.bat & removex86.bat & ultimatex86.ini
    + GImageX

    * Note: After unpacking ISO file you copy files into the folder sources setup.exe a certain folder (take it away to the step 12)

    step 1 : extract the files gimagex.exe down into the path C: \ Program files \ Windows AIK \ Tools \ x86 and create a shortcut on the desktop (running for fast that). Unzip the file install tweak win in C: \ Win6x (homemade) and renamed tweak.exe (for brevity).

    Step 2 : Create two folders on the C drive (remember that if you do drive C drive flashed another bat file again to correct it). Properly following folder name C: \ s1 & C: \ s2 . S1 directory to host the files and folders windows 7 2 used to mount .wim files (mount the virtual disk, the user sure everyone knows).

    Step 3 : Extract the ISO file of Windows 7 and copy all files to the folder you just created s1

    Step 4 : Run GImageX , mount the file install.wim (located in the folder C: \ s1 \ sources ) as shown in Figure. Select the Mount , in muc Mount Point click Browse to select the folder C: \ s2 , Section source continues to do the same over. Then press select select versions Ultimate (current image how it is 5 . Then a check Read and Write .

    [​IMG]

    Step 5 : Start-> Run-> Mark cmd in the box and click OK then tremble do the same as in Fig.

    [​IMG]

    Step 6 : Tick the box Commit Changes then select .wim file and then click Unmount (do exactly the same on the show below do not do wrong).

    Step 7 : Extract batch files into specific folders. Copy files ultimatex86.bat the path C: \ s1 \ sources, copy files ultimatex86.inito folder C: \ vLite \ Preset . If the folder created in step 2, but in a different folder, it must fix that bat file.

    Step 8 : Mount the file install.wim as step 4. Then run cmd do exactly deadliest form

    [​IMG]
    [​IMG]

    Step 9 : After DISM done removing the package, exit cmd. Commit chages and unmounting as step 6

    Step 10 : Running vLite, select the version of the Windows 7 Ultimate and continue to remove some things. Use file ultimatex86.ini folders copied presets . Then continue to do the same shape:
    ***Hidden content cannot be quoted.******Hidden content cannot be quoted.***
    Click to expand...
    Good
     
  • 0hasib

    0hasib Registered User

    55
    1
    15
    goddd.....................................
     
  • Hassan

    Hassan Registered User

    14
    1
    10
    great
     
  • mdelyars

    mdelyars Registered User

    13
    0
    5
    thanks great this
     
  • loopypalm

    loopypalm Registered User

    16
    0
    5
    thx man ! i was looking for something like this ^^
     
  • genesistovar

    genesistovar Registered User

    2
    0
    5
    Greattttttt thankyouuuuuuuuuuu
     
  • selmo22

    selmo22 Registered User

    32
    0
    10
    Vleu bbbbb..........................................
     
  • Share This Page